Details
The Olight S2 Baton is a new side switch LED torch powered by 1x 18650 battery or 2xCR123A lithium batteries. The S2 uses a high performance Cree XM-L2 LED which is able to deliver a maximum output of 950 lumens. This LED torch throws a homogeneous beam by using a 90% light transmittance PMMA TIR lens that provides the light with a cool white balanced appearance. The Olight S2 has same signature features as the OLIGHT S-series flashlights including a low-profile side switch, removable pocket clip, magnetic tail cap, and timer. The Olight S2 is the best choice for users looking for LED Torch that can take an 18650 battery and still have an extremely small size.
KEY FEATURES:
- Cree XM-L2 / U3 LED
- Maximum output up to 950 lumens
- 22 degree emission angle 90% transparent ratio PMMA TIR lens to deliver homogenous spot light
- Stainless steel bezel and switch ring with PVD coating
- 4 standard modes: 950 lumens, 400 lumens, 80 lumens, 10 lumens
- 2 special modes: 0.5 lumens and 10Hz strobe mode
- Turbo mode has a limit of 2 minutes for constant on, after that the light output will ramp down by 50% within 1 minute
- Built-in thermal management safety program.
- Built-in timer: 3 minutes (short timer)or 9 minutes (long timer)
- Flat tail cap design contains a strong magnet providing the ability to place it upside down and use it as a hands-free work light
- Positive polarity end on the battery faces the tail of the flashlight, reverse polarity protection to prevent improper battery installation
- Removable pocket clip that is scratch resistant
- Low standby current below 10uA
INCLUDED ACCESSORIES:
- Lanyard
- User Manual
- Battery magazine
Brand | Olight |
---|---|
Insulation Type | N/A |
Temperature Rating | N/A |
Max Magnification | No |
If you have any questions about this product, then you can leave us a message via Facebook below